|
Description: (& please see extra photos below)
Reflect the heat from the back of the radiator into the room
The angle of the fins alters the air flow pattern behind the radiator creating a still-air thermal barrier in front of the panel. This deflects heat back towards the radiator and into the room at a higher speed.
I have been through our stock of panels and put a batch of slightly defective panels together in this lot for a greatly discounted price.
Flaws are varied, such as crushed/damaged corners:
Panels cut too a bit too small (very few of these):
Panels with a production flaw in one noticeable spot:
Panels with marks running across them:
In spite of the flaws, these panels would still give a significant saving on your heating bill, reducing your carbon footprint.
Reflect the heat from the back of the radiator into the room
The angle of the fins alters the air flow pattern behind the radiator creating a still-air thermal barrier in front of the panel. This deflects heat back towards the radiator and into the room at a higher speed.
-
Save heat losses and money
-
Reduces the amount of heat needed to warm the air in a room
-
Insulates behind the radiator, preventing heat loss through wall
-
Faster warm up times
-
Each panel measures 410mm x 270mm (except for those cut a little short - see photo above)
-
Easy to install - without removing radiators!
This auction is for twenty panels, four of the packs illustrated in photos below.
Join panels together to make required radiator size (See table below for number of packs required to completely back the radiator)
| Radiator size(mm): |
420x600 |
420x900 |
420x1300 |
620x500 |
620x600 |
620x800 |
620x900 |
620x1000 |
620x1100 |
620x1200 |
620x1300 |
620x1400 |
620x1600 |
| No. of packs: |
1 |
1 |
2 |
1 |
1 |
1 |
2 |
2 |
2 |
2 |
2 |
2 |
2 |
Radiators don't have to be removed but a 25mm space is recommended between the wall and the radiator to allow the 10mm panel to slip behind. If the space is less, it is still possible to fit your panels, but it would be a little more awkward.
Please note: double sided tape is not provided. Measure your radiator and cut the panel(s) to size. Apply the tape and carefully place behind radiator. Secure the top of the panel manually, and use a long implement to secure the sides and bottom.

If more than one auction is purchased, postage discount is available, depending on weight and size of combined items.
Check out my other items. |